cdesktop/cde/doc/C/help/Mailer/Messages.sgm

<!-- $XConsortium: Messages.sgm /main/5 1996/09/08 21:55:19 rws $ -->
<!-- (c) Copyright 1995 Digital Equipment Corporation. -->
<!-- (c) Copyright 1995 Hewlett-Packard Company. -->
<!-- (c) Copyright 1995 International Business Machines Corp. -->
<!-- (c) Copyright 1995 Sun Microsystems, Inc. -->
<!-- (c) Copyright 1995 Novell, Inc. -->
<!-- (c) Copyright 1995 FUJITSU LIMITED. -->
<!-- (c) Copyright 1995 Hitachi. -->
<!-- Help volume: Mailer -->
<!-- File name: Messages -->
<Chapter Id="Messages">
<Title>Mailer Messages</Title>
<Para>This section describes possible causes and solutions for
Mailer error messages.
</Para>
<IndexTerm>
<Primary>error messages</Primary>
</IndexTerm>
<IndexTerm>
<Primary>messages, error</Primary>
</IndexTerm>
<Sect1 Id="DTMAILHELPUNKNOWNSTATE">
<Title>Mailer is confused about the state of this mailbox.</Title>
<Para><GlossTerm Role="nogloss">Close the mailbox by choosing OK and then restart Mailer.</GlossTerm></Para>
<!--
<location id=DTMAILHELPUNKNOWNSTATE>&empty;<\location>
-->
<Para>Something has caused your mailbox to be in an unknown state in the
system. This could occur if you did a save in another instance of
Mailer or Mail while this Mailer was running.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.1">
<Para>Try closing Mailer and restarting it.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.2">
<Para>If that doesn't work, contact your system administrator.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPRUNATTACH">
<Title><Emphasis>attachment name</Emphasis> is an executable attachment.</Title>
<Para><GlossTerm Role="nogloss">Do you want to run it?</GlossTerm></Para>
<!--
<location id=DTMAILHELPRUNATTACH>&empty;<\location>
-->
<Para>The selected attachment is an executable file. You can either run
the executable or cancel the operation.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.3">
<Para>If you weren't expecting to run the executable, you can
save the attachment to a file and run it later.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPOKSTARTVACATION">
<Title>You are already using the forwarding facility</Title>
<Para><GlossTerm Role="nogloss">for something other than Vacation. While Vacation is running,</GlossTerm>
<GlossTerm Role="nogloss">Vacation will be appended to this other forwarding activity.</GlossTerm>
<GlossTerm Role="nogloss">Is it still OK to start Vacation?</GlossTerm></Para>
<!--
<location id=DTMAILHELPOKSTARTVACATION>&empty;<\location>
-->
<Para>When the Vacation option is activated in Mailer, it uses a forwarding
facility to save your messages and reply to people who send messages to you.
If you use this forwarding facility for something else, like forwarding
your mail to another user account,
the Vacation option is appended to the .forward file and
both features take effect.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.4">
<Para>Remove the forwarding facility in the .forward file if you want
only the Vacation option to take effect.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.5">
<Para>Turn Vacation off if you want only the forwarding facility
to take effect.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPREMOVEVACATION">
<Title>You are already running the vacation program</Title>
<Para><GlossTerm Role="nogloss">in your .forward file. Consult documentation on how to stop it</GlossTerm>
<GlossTerm Role="nogloss">and remove it from your .forward file. Try this command after</GlossTerm>
<GlossTerm Role="nogloss">fixing that problem.</GlossTerm>
<!--
<location id=DTMAILHELPREMOVEVACATION>&empty;<\location>
--></Para>
<Para>You tried to start the Vacation facility when you already had it running.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.6">
<Para>Only run one instance of Vacation.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOWRITEVACATION">
<Title>Cannot open .vacation.msg file -- No write permission.</Title>
<!--
<location id=DTMAILHELPNOWRITEVACATION>&empty;<\location>
-->
<Para>The file that contains your vacation information message,
usually located in your home directory,
is currently a read-only file.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.7">
<Para>Change file permissions so you have write permission, then
try to create and save a vacation message.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPEXISTSVACATION">
<Title>vacation.msg file exists. Replace with new text?</Title>
<!--
<location id=DTMAILHELPEXISTSVACATION>&empty;<\location>
-->
<Para>You currently have vacation message text in your .vacation.msg file.
Do you want to overwrite it?
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.8">
<Para>You can overwrite the existing text with the new message or you
can choose to cancel, saving the existing vacation message.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOCOMPOSE">
<Title>Unable to create a Compose window.</Title>
<!--
<location id=DTMAILHELPNOCOMPOSE>&empty;<\location>
-->
<Para>When you selected New Message from the Compose menu, Mailer
was unable to create a Compose window.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.9">
<Para>Try again, and if it doesn't work, restart Mailer.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOTEMPLATE">
<Title>The template does not exist.</Title>
<!--
<location id=DTMAILHELPNOTEMPLATE>&empty;<\location>
-->
<Para>The template you have selected for use is not in the
location specified in the Mailer Templates Options dialog box.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.10">
<Para>Make sure the Template Options dialog box
specifies the correct location (full path name) of the template.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPCORRUPTTEMPLATE">
<Title>The template appears to be corrupt.</Title>
<!--
<location id=DTMAILHELPCORRUPTTEMPLATE>&empty;<\location>
-->
<Para>The template file is in the specified location but something is
wrong with it.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.11">
<Para>Make sure the template file is not corrupt. Replace it with
a backup file if possible and try again to insert the template.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOMEMTEMPLATE">
<Title>There is not enough memory to load the template.</Title>
<!--
<location id=DTMAILHELPNOMEMTEMPLATE>&empty;<\location>
-->
<Para>The template you are attempting to use in Mailer exceeds the amount
of memory you have available.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.12">
<Para>Close some applications on the desktop and try again to load
the template.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPCANTINITTOOLTALK">
<Title>ToolTalk is not initialized.</Title>
<Para><GlossTerm Role="nogloss">Mailer cannot run without ToolTalk. Try starting</GlossTerm>
<GlossTerm Role="nogloss">/usr/dt/bin/dtsession, or contact your system administrator.</GlossTerm></Para>
<!--
<location id=DTMAILHELPCANTINITTOOLTALK>&empty;<\location>
-->
<Para>While attempting to perform a function, ToolTalk could not be
initialized.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.13">
<Para>Check with your system administrator about whether
your system is working correctly with ToolTalk.
</Para>
</ListItem>
</ItemizedList>
<!--
<s1 id=MAILHELPNOWINDOWS> Unable to initialize windows. Exiting.
<location id=DTMAILHELPNOWINDOWS>&empty;<\location>

There is a problem with your window system.     

<procedure>Possible Solution:

<list bullet>
<item> Make sure your window system is running properly or contact
your system administrator.
<\list>
-->
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOINSTALLMAIL">
<Title>Mailer has not been properly installed and</Title>
<Para><GlossTerm Role="nogloss">cannot run because the execution group is incorrectly set.</GlossTerm></Para>
<!--
<location id=DTMAILHELPNOINSTALLMAIL>&empty;<\location>
-->
<Para>On some systems, Mailer must be run with the group id (execution group)
set to "mail". Your execution group has not been set so that
Mailer can run.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.14">
<Para>Check with your system administrator to set the group permission
correctly on the Mailer executable.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOVIEW">
<Title>You do not have permission to view <Emphasis>file name</Emphasis>.</Title>
<!--
<location id=DTMAILHELPNOVIEW>&empty;<\location>
-->
<Para>You do not have permission to view the specified mailbox.
The file permissions may be set so you don't have read permission.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.15">
<Para>If you own the file, change the permissions so you can read it.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.16">
<Para>If you don't own the file, ask the file's owner to change the
permissions so you can read it.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPDIRECTORYONLY">
<Title>The mailbox is a directory and cannot be opened.</Title>
<!--
<location id=DTMAILHELPDIRECTORYONLY>&empty;<\location>
-->
<Para>The selected mailbox name is a directory (folder) and cannot be opened.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.17">
<Para>Indicate a mailbox name that is a file.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPSELECTATTACH">
<Title>An attachment needs to be selected before issuing</Title>
<Para><GlossTerm Role="nogloss">the Save As command to save to a file.</GlossTerm></Para>
<!--
<location id=DTMAILHELPSELECTATTACH>&empty;<\location>
-->
<Para>You selected Save As without first selecting an attachment.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.18">
<Para>Select an attachment, then select Save As.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPTAKELOCK">
<Title>The mailbox is locked. You can manually unlock the</Title>
<Para><GlossTerm Role="nogloss">mailbox and try again or contact your system administrator.</GlossTerm></Para>
<!--
<location id=DTMAILHELPTAKELOCK>&empty;<\location>
-->
<Para>Someone else may currently be accessing this mailbox or you may have this
mailbox open elsewhere.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.19">
<Para>If you would still like to access the mailbox, choose OK so that
Mailer will request the lock on this mailbox to be released. If the
request is successful, you will have access to the mailbox.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.20">
<Para>Choose Cancel to end the attempt to open this mailbox.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPDESTROYMARKMSG">
<Title>Destroy the messages you have marked for</Title>
<Para><GlossTerm Role="nogloss">deletion in this mailbox?</GlossTerm></Para>
<!--
<location id=DTMAILHELPDESTROYMARKMSG>&empty;<\location>
-->
<Para>When you try to close a mailbox, if you have deleted messages,
you are asked if you want to destroy the messages marked for deletion.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.21">
<Para>Click Cancel if you do not want to permanently delete the messages.
</Para>
<Para>Mailer closes after saving changes to the mailbox.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOOVERWRITE">
<Title>Unable to overwrite <Emphasis>file name</Emphasis>. Check file permissions</Title>
<Para><GlossTerm Role="nogloss">and retry.</GlossTerm></Para>
<!--
<location id=DTMAILHELPNOOVERWRITE>&empty;<\location>
-->
<Para>The selected file is not writeable.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.22">
<Para>Check file permissions and change them if necessary
before trying the operation again.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOOPEN">
<Title>Unable to open <Emphasis>attachment name</Emphasis>.</Title>
<!--
<location id=DTMAILHELPNOOPEN>&empty;<\location>
-->
<Para>The specified attachment cannot be opened. You may not have read
permission for the file.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.23">
<Para>Check the attachment file permissions and change them if necessary
before trying the operation again.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOALLOCMEM">
<Title>Unable to allocate memory.</Title>
<!--
<location id=DTMAILHELPNOALLOCMEM>&empty;<\location>
-->
<Para>There is not enough memory for the selected operation.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.24">
<Para>Try closing some applications and trying again.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPALREADYEXISTS">
<Title><Emphasis>file name</Emphasis> already exists. Replace?</Title>
<!--
<location id=DTMAILHELPALREADYEXISTS>&empty;<\location>
-->
<Para>You have tried to save an attachment to a file name that already
exists in your file system.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.25">
<Para>If you do not want to overwrite the existing file, cancel,
and type a different file name.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOREPLACE">
<Title>Unable to replace <Emphasis>file name</Emphasis>.</Title>
<!--
<location id=DTMAILHELPNOREPLACE>&empty;<\location>
-->
<Para>The file name you specified cannot be overwritten.
This may be because the directory is not writeable or
because you are trying to write to a read-only file system.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.26">
<Para>Check the directory permissions and add write permission if
possible.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.27">
<Para>Specify another (writeable) location to save the message.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOCREATE">
<Title>Unable to create <Emphasis>file name</Emphasis>.</Title>
<!--
<location id=DTMAILHELPNOCREATE>&empty;<\location>
-->
<Para>The mailbox name you specified cannot be created.
This may be because the directory is not writeable or
because you are trying to write to a read-only file system.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.28">
<Para>Check the directory permissions and add write
permission if possible.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.29">
<Para>Specify another (writeable) location to save the message.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPEXISTSATTACH">
<Title>The name already exists. Overwrite?</Title>
<!--
<location id=DTMAILHELPEXISTSATTACH>&empty;<\location>
-->
<Para>You have indicated an attachment that already exists in your file system.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.30">
<Para>If you do not want to overwrite the existing attachment, cancel,
and type a different name for the attachment.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPEXISTOVERWRITE">
<Title><Emphasis>file name</Emphasis> already exists. Overwrite?</Title>
<!--
<location id=DTMAILHELPEXISTOVERWRITE>&empty;<\location>
-->
<Para>You have indicated a mailbox that already exists in your file system.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.31">
<Para>If you do not want to overwrite the existing mailbox, cancel,
and type a different name for the mailbox.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOWRITE">
<Title>Unable to write to <Emphasis>file name</Emphasis>.</Title>
<!--
<location id=DTMAILHELPNOWRITE>&empty;<\location>
-->
<Para>You tried a Save As Text operation, but you don't have write permission
for the file.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.32">
<Para>Check the file permissions and add write
permission if possible.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.33">
<Para>Specify another (writeable) file name to save the message.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPCLOSECOMPOSEWINDOW">
<Title>The Compose window contains text or</Title>
<Para><GlossTerm Role="nogloss">attachments that will be lost if the window is closed.</GlossTerm>
<GlossTerm Role="nogloss">Close the Compose window?</GlossTerm></Para>
<!--
<location id=DTMAILHELPCLOSECOMPOSEWINDOW>&empty;<\location>
-->
<Para>You tried to close the Compose window while there was text in it.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.34">
<Para>Choose OK to close the Compose window and any text you
typed will not be saved.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.35">
<Para>Choose Cancel to return to the Compose window.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOLOADVACATION">
<Title>There is not enough memory to load the</Title>
<Para><GlossTerm Role="nogloss">existing .vacation.msg file.</GlossTerm></Para>
<!--
<location id=DTMAILHELPNOLOADVACATION>&empty;<\location>
-->
<Para>Your current .vacation.msg file is too large.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.36">
<Para>Close some applications and try again.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPCORRUPTVACATION">
<Title>The existing .vacation.msg file appears to be corrupt.</Title>
<!--
<location id=DTMAILHELPCORRUPTVACATION>&empty;<\location>
-->
<Para>The file is in the correct location but something is wrong with it.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.37">
<Para>Check the file (usually in your home directory) to make sure
it is not damaged. If it is, replace it with a new file.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPSENDLOSEATTACH">
<Title>You have an attachment open that may have</Title>
<Para><GlossTerm Role="nogloss">unsaved changes. Sending this message will break the</GlossTerm>
<GlossTerm Role="nogloss">connection to the open attachment. Any unsaved changes</GlossTerm>
<GlossTerm Role="nogloss">will not be part of the message. You can use Save As to</GlossTerm>
<GlossTerm Role="nogloss">save changes after the connection is broken, but the changes</GlossTerm>
<GlossTerm Role="nogloss">will not be part of the attachment.</GlossTerm></Para>
<!--
<location id=DTMAILHELPSENDLOSEATTACH>&empty;<\location>
-->
<Para>You tried to send a message without saving changes in some open
attachments. This warning makes sure that is what you intended.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.38">
<Para>Save the changes to the attachments before sending.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPSELECTONEATTACH">
<Title>Select only one attachment and then choose rename.</Title>
<!--
<location id=DTMAILHELPSELECTONEATTACH>&empty;<\location>
-->
<Para>You chose Rename when you had more than one attachment selected.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.39">
<Para>Select only one attachment before choosing rename.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPUNKNOWNUSER">
<Title>Some of the addresses in the message are</Title>
<Para><GlossTerm Role="nogloss">incorrect, and do not refer to any known users in the system.</GlossTerm>
<GlossTerm Role="nogloss">Please make sure all of the addresses are valid and try again.</GlossTerm></Para>
<!--
<location id=DTMAILHELPUNKNOWNUSER>&empty;<\location>
-->
<Para>You may have typed an incorrect user name or a name that the system
doesn't recognize.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.40">
<Para>Check all of the user names for accuracy, make corrections if
necessary, and resend the message.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOMEMORY">
<Title>Mailer does not have enough memory available to</Title>
<Para><GlossTerm Role="nogloss">send this message. Try closing other applications and resend this message.</GlossTerm></Para>
<!--
<location id=DTMAILHELPNOMEMORY>&empty;<\location>
-->
<Para>Mailer ran out of memory.</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.41">
<Para>Try closing some other applications to free up some memory.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPNOSEND">
<Title>An error occurred while trying to send your message.</Title>
<Para><GlossTerm Role="nogloss">Check to make sure the message was received. If not, you may</GlossTerm>
<GlossTerm Role="nogloss">have to resend this message.</GlossTerm></Para>
<!--
<location id=DTMAILHELPNOSEND>&empty;<\location>
-->
<Para>There was an error from the mail transport (sendmail).</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.42">
<Para>Contact the intended recipient by some means other than mail
and ask them if they received your message. If not, you may have to
resend.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPBADGROUPID">
<Title>Exit Mail?</Title>
<!--
<location id=DTMAILHELPBADGROUPID>&empty;<\location>
-->
<Para>It appears that mail is installed incorrectly. You will have to
exit mail and make some changes.
</Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.43">
<Para>You will need to exit and change your permissions for Mailer.
Your system administrator should help you by becoming root
and changing permissions in /usr/dt/bin/dtmail.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPFATALERROR">
<Title>Fatal Error.</Title>
<Para>Mailer has come across a fatal (unrecoverable) error.
<!--
<location id=DTMAILHELPFATALERROR>&empty;<\location>
--></Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.44">
<Para>Check with your system administrator.
</Para>
</ListItem>
</ItemizedList>
</Step>
</Procedure>
</Sect1>
<Sect1 Id="DTMAILHELPERROR">
<Title>Recoverable error.</Title>
<Para>Mailer has encountered a recoverable error.
<!--
<location id=DTMAILHELPERROR>&empty;<\location>
--></Para>
<Procedure>
<Title>Possible Solution:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.45">
<Para>Follow the instructions in the error dialog.
</Para>
<Para><Emphasis>Or</Emphasis>
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.46">
<Para>Check with your system administrator.
</Para>
</ListItem>
</ItemizedList>
<!--
<s1 id=MAILHELPUNRECOGFORMAT>The Format of This Container is Unrecognized
<location id=DTMAILHELPUNRECOGFORMAT>&empty;<\location>

<procedure>Possible Solution:

<list bullet>
<item>The  format of the selected mailbox is not one of
the recognized formats such as Internet or Sun Mail Tool. 
<item> Select another mail container object.
<\list>

<s1 ID=MAILHELPCANNOTINCLUDE> Error: Cannot include file.
<location id=DTMAILHELPCANNOTINCLUDE>&empty;<\location>

The file you have indicated cannot be included into the
mail message.

<procedure>Possible Solution:

<list bullet>
<item> Make sure the file you are attempting to include is 
in your file system and that it is not corrupt and try again. 
<\list>

<s1 id=UnableToSendTheMail>Unable to Send Mail
<location id=Err9UnableToSendTheMail>&empty;<\location>

<procedure>Possible Solutions:

<list bullet>
<item>Verify that you have typed the correct email address.
<item>Ensure that the names of the recipients are separated by a comma.
<item>If this problem persists, contact your system administrator. 
<\list>

<s1 id=ThisIsNotAMailContainer>This is Not a Mail Container
<location id=Err12ThisIsNotAMailContainer>&empty;<\location>

<procedure>Possible Solution:

<list bullet>
<item> The  format of the selected mailbox is not one of
the recognized formats such as Internet-MIME or Sun Mail Tool. 
<item>Select
another mail container.
<\list>
-->
</Step>
</Procedure>
</Sect1>
<Sect1 Id="Err3InsufficientMemory">
<Title>Insufficient Memory for Requested Operation</Title>
<!-- <location id=Err3InsufficientMemory>&empty;<\location> -->
<Procedure>
<Title>Possible Solutions:</Title>
<Step>
<ItemizedList Mark="&bull;">
<ListItem Id="HMLR.MSG.item.47">
<Para>Be sure that you are not running too many applications.
</Para>
<Para>Close some applications if possible in order to free up some system memory.
</Para>
</ListItem>
<ListItem Id="HMLR.MSG.item.48">
<Para>Increase swap space. If you do not know how to increase swap
space, contact your system administrator.
</Para>
</ListItem>
</ItemizedList>
<Para>See <OLink Type="Jump" LocalInfo="Intromgr OpenWindowTA">To Open and Close an Application Window</OLink>
<!--
<s1 id=MAILHELPNOMAILRC> Unable to Get .mailrc
<location id=DTMAILHELPNOMAILRC>&empty;<\location>

<procedure>Possible Solution:

<list bullet>
<item>Make sure the .mailrc file is in your home directory.
<item>Ensure the .mailrc file has proper entries in it.
<item>Contact your system administrator if you are not sure of what
should be in the .mailrc file.
<\list>
--><!-- EOF: Messages --></Para>
</Step>
</Procedure>
</Sect1>
</Chapter>
<!--fickle 1.15 help-to-docbook 1.4 01/17/96 16:41:29-->